MECHANICAL INDUSTRY
Resistance to the continuous passage of forklift trucks and wear, resistance to impact and point loads, and resistance to occasional spillage of chemical products are the main requirements to be taken into account in this type of application.
Required features:
RECOMMENDED SYSTEMS
COMPODUR PLUS COLOR SYSTEM
100% SOLID COMPODUR SYSTEM
COMPOHARD PLUS SYSTEM
COMPOTOP HARD SYSTEM
COMPOTOP SYSTEM
EPOXY SYSTEM
COMPOSOL SYSTEM
COMPODUR PLUS COLOR SYSTEM WITHOUT CHIPBOARD
- Acrylic-epoxy coating on asphalt agglomerate support indicated for car parks, industrial buildings, warehouses, etc. subjected to moderate mechanical and chemical loads that can optionally be finished in polyurethane paints.
COMPODUR THIN LAYER SELF-LEVELLING SYSTEM
- Smooth self-levelling thin-layer coating for interior concrete floors, made up of a 100% solid, solvent-free two-component epoxy system, obtained by successive application of a colorless two-component primer based on Compodur PR epoxy resins and a second self-leveling two-component layer based on Compodur TL epoxy resins premixed with selected aggregates.
- Approximate total thickness of 1.00 mm.
- Fields of application: pavements for mechanical, electronic, chemical, pharmaceutical, food, logistics industries, etc.
COMPODUR THICK LAYER SELF-LEVELLING SYSTEM
- Smooth self-leveling thick-layer coating for interior concrete floors, made up of a 100% solid, solvent-free two-component epoxy system, obtained by successive application of a colorless two-component primer based on Compodur PR epoxy resins, two-component mortar layer Self-levelling based on Compodur TL epoxy resins premixed with Filler.
- Approximate total thickness of 2.0-3.0 mm.
- Fields of application: pavements for mechanical, electronic, chemical, pharmaceutical, food, logistics industries, etc.
COMPOHARD PLUS SYSTEM WITHOUT CONCRETE
- Treatment of smooth or rough surfaces (with the addition of aggregate), pigmented, which is applied to concrete surfaces. Obtained by applying a layer of Composil BV (primer) and a layer of Compohard Top (surface hardener).
- Approximate thickness: 0.2mm.
- Fields of application: industrial storage, logistics, mechanical and chemical sectors.
COMPOTOP HARD SYSTEM WITHOUT CONCRETE
- The Compotop Hard s/concrete system is a rough, pigmented coating that is applied to concrete surfaces. Obtained by applying a layer of Composil BV primer (with added aggregate), two layers of Compotop (synthetic mortar) and sealing with Compohard Top (surface hardener).
- Approximate thickness: 1-1.5 mm.
- Fields of application: car parks, mechanical sectors
COMPOTOP SYSTEM WITHOUT CONCRETE
- Rough coating for concrete floors obtained by applying Epoxan (epoxy mortar) as a bonding bridge to the support, a layer of Compotop (synthetic mortar) and optional sealing with a layer of Paintex acrylic paint.
- Approximate thickness: 1.5mm
- Fields of application: roads in parks, gardens, walks, recreational areas and cycle paths
COMPOSOL SYSTEM
- Smooth surface treatment, matt or gloss, for interior concrete floors, obtained by applying two layers of two-component pigmented epoxy paint via Composol water.
- Approximate thickness: 300 microns.
- Fields of application: car parks and light traffic areas, pavements for mechanical, electronic, chemical, pharmaceutical, food, logistics industries, etc.
EPOXY SYSTEM
- Rough coating for interior concrete floors, obtained by applying a multilayer system based on epoxy mortars. Said system is formed by the successive application of two layers of Epoxan (epoxy mortar) and a layer of Composol Mate (epoxy paint) as a system seal.
- Approximate thickness: 1.0 mm.
- Fields of application: car parks and slow traffic areas indoors.
