PARKING AND GARAGES

Depending on the use to which a floor is going to be put, we can select the most suitable system for it.

In road areas subject to medium traffic of light vehicles and in parking areas, the main requirements will be:

  • Resistance to traffic and vehicle maneuvers (even on wet surfaces)
  • Resistance to occasional drop in fuel
  • Ease of cleaning

Required features:

Pavimentos industriales Parking - COMPOSAN

RECOMMENDED SYSTEMS

COMPOTOP HARD SYSTEM

URBAN COMPODUR SYSTEM

COMPODUR PLUS COLOR SYSTEM

EPOXY SYSTEM

COMPOSOL SYSTEM

COMPOTOP HARD SYSTEM WITHOUT CHIPBOARD

  • High-resistance rough coating for interiors that is applied on asphalt agglomerate pavements. Obtained by applying two layers of Compotop (synthetic mortar) and sealing with a layer of Compohard Top (surface hardener).
  • Approximate thickness: 1 mm.
  • Fields of application: car parks, garages, industrial buildings, etc.

COMPOTOP HARD SYSTEM WITHOUT CONCRETE

  • The Compotop Hard s/concrete system is a rough, pigmented coating that is applied to concrete surfaces. Obtained by applying a layer of Composil BV primer (with added aggregate), two layers of Compotop (synthetic mortar) and sealing with Compohard Top (surface hardener).
  • Approximate thickness: 1-1.5 mm.
  • Fields of application: car parks

COMPODUR URBAN SYSTEM WITHOUT AGGLOMERATED

  • Rough coating for asphalt agglomerate pavements, obtained by applying a multilayer system. Said system is formed by the successive application of a layer of Compotop (synthetic mortar) for the preparation of the support, two layers of Compotex (acrylic mortar) and a layer of Paintex (acrylic paint) to seal the system.
  • Approximate thickness: 2.0 mm.
  • Fields of application: roads in parks, gardens and walkways, light traffic areas at low speeds.

COMPODUR URBAN SYSTEM WITHOUT CONCRETE

  • Rough coating for concrete floors, obtained by applying a multilayer system. Said system is formed by the successive application of a layer of Epoxan (epoxy mortar) as a bonding and adhesion bridge, two layers of Compotex (acrylic mortar) and a layer of Paintex (acrylic paint) as a sealing system.
  • Approximate thickness: 1.0 mm.
  • Fields of application: parks, gardens and walkways; parking lots and light traffic areas at low speeds.

COMPODUR PLUS COLOR SYSTEM WITHOUT CHIPBOARD

  • Acrylic-epoxy coating on asphalt agglomerate support indicated for car parks, industrial buildings, warehouses, etc. subjected to moderate mechanical and chemical loads that can optionally be finished in polyurethane paints.

EPOXY SYSTEM

  • Rough coating for interior concrete floors, obtained by applying a multilayer system based on epoxy mortars. Said system is formed by the successive application of two layers of Epoxan (epoxy mortar) and a layer of Composol Mate (epoxy paint) as a system seal.
  • Approximate thickness: 1.0 mm.
  • Fields of application: car parks and slow traffic areas indoors.

COMPOSOL SYSTEM

  • Smooth surface treatment, matt or gloss, for interior concrete floors, obtained by applying two layers of two-component pigmented epoxy paint via Composol water.
  • Approximate thickness: 300 microns.
  • Fields of application: car parks and light traffic areas, pavements for mechanical, electronic, chemical, pharmaceutical, food, logistics industries, etc.

If you are currently considering any extension or renovation project in which we can advise you, do not hesitate to contact us:

n

Technical advice

i

Collaboration in drafting projects

l

Free estimates

Execution of new construction and rehabilitation through our network of authorized installers

× ¿Cómo puedo ayudarle?